BAK

BAKFlip MX4

Hard folding, 400 lb panels, 5-year warranty

From $1,299.99

Find the part for your truck

Pick your truck to see the part that fits, its price and photos.

One more question about your truck and we'll have your part.

Call us and we'll find the right part for your truck.

  • Locks itself when closed: patented auto-latch, no key needed
  • 400 lb on top (evenly distributed)
  • Folds to the cab for 100% bed access; drive with it open
  • Never blocks the third brake light (8' beds excepted)
  • Sits nearly flush with the bed rails, in textured matte black
  • No-drill, click-in install in about 30 minutes, one person
  • Assembled in Missouri ยท 5-year warranty

5-year limited

About this product

There's a reason every hard folding cover out there looks a little like this one. The BAKFlip MX4 basically wrote the playbook for hard folding tonneaus, and the Gen 3 (model year 2025) is the best version yet.

The panels are aluminum over a high-density polymer core, 22% stronger than the original MX4 and rated for 400 lb spread evenly on top. Close the cover and BAK's patented auto-latch locks every panel by itself, with no key and no extra step. Gen 3's re-engineered latches hold up better against forced entry than Gen 2's. Lock your tailgate and the bed is locked.

For weather, revised EPDM perimeter seals and tight-fit clamps seal the cover to the bed rails, a 13% longer dual-action tailgate seal (on most trucks) covers the back, and drain tubes carry off anything that sneaks past.

When it's time to haul something big, fold it panel by panel toward the cab or stand it all the way up against the rear window and drive. It never blocks your third brake light, in any position.

Install is a click-in, bolt-on job with clamps and no drilling, 12% faster than before and about 30 minutes with one person. It's assembled in Missouri and backed by a 5-year warranty.

Features

  • The original. Often copied, never matched.

    The original. Often copied, never matched.

    MX4 is the cover that created the hard-folding category, and Gen 3 still sets the bar with BAK's patented latches, premium materials and a design that's been proven on a lot of trucks.

  • Automatic security, standard

    Automatic security, standard

    The patented auto-latch grabs the rails the second the cover closes. There's no separate lock to remember: close it, lock the tailgate, and your gear is locked down.

  • Sealed edge to edge

    Sealed edge to edge

    Advanced seals and precision-fit clamps run the whole perimeter, so rain, car washes and road spray stay outside and your cargo stays dry.

  • Multi-layer build that won't bend

    Multi-layer build that won't bend

    Premium multi-layer aluminum over a high-density core gives you a stiffer, tougher top, tested for years of daily use. Single-layer covers flex under pressure; this one is built not to.

  • Full bed, brake light still showing

    Full bed, brake light still showing

    Fold it to the cab, secure it and drive with the bed wide open. Big loads don't mean pulling the cover off, and BAK says it's the only hard fold that never blocks your third brake light.

  • One-person install, under 30 minutes

    One-person install, under 30 minutes

    The click-in design goes on in under 30 minutes with no extra hands, and no drilling on most trucks.

Videos

New and Improved RealTruck BAKFlip MX4 (Gen3)

Install on a 2024 Ford F-150

Install on a 2024 GMC Sierra

Install on a 2026 Chevy Silverado 2500

Install on a 2023 Ford F-250 Super Duty

Install on a 2024 Ford Ranger

Install on a 2024 GMC Canyon

Specifications

Brand
BAK
Series
BAKFlip MX4 (Gen 3)
Type
Hard folding
Material
Aluminum
Finish
Textured matte black
Profile
Low profile
Bed sizes
4.5 ft, 5 ft, 5.5 ft, 5.8 ft, 6 ft, 6.4 ft, 6.5 ft, 6.8 ft, 8 ft
Bed access
Full bed access
Rails
No rails
Load rating
400 lbs
Locks
Yes
No-drill install
Yes
Install time
About 30 minutes
Warranty
5-year limited

Install guides & documents

Warranty

  • Covers defects in materials and workmanship, from the original date of purchase.
  • BAK repairs or replaces the cover or part, its choice, and may substitute a newer model of similar form and function.
  • Original buyer only; not transferable. Keep the dated receipt or register the cover with RealTruck.
  • Not covered: accident damage, misuse, improper install, hail and other acts of nature, or towing the truck from the rear with the cover on.
  • To claim, get an RMA number from customer service before shipping anything back.

Good questions

Is this the new Gen 3 MX4?
Yes, every new MX4 is Gen 3. It has 22% stronger panels, re-engineered latches, better seals, a 13% longer tailgate seal and click-in clamps that make install about 12% faster.
Can I open the cover without dropping the tailgate?
No, and that's the security: the cover locks under your closed tailgate. Lock the tailgate and the whole bed is locked.
Do I have to open the cover to close the tailgate?
No. The dual-action tailgate seal lets you close the tailgate with the cover open or closed on most trucks.
My F-150 bed is 5'5" but this part says 5'7". Will it fit?
Yes. Ford and BAK measure from different spots. Choose your truck and the fit check matches the right part.
How heavy is it?
About 60-71 lb shipped, depending on bed size, and one person can install it. Each panel is roughly 10-13 lb to lift. Want it lighter still? Look at the MX4 EZ-Lift.
Does it block my third brake light when folded?
Not on short and standard beds. On 8' beds the folded stack (4 panels plus a header) covers the third brake light and the camera above it.
Can I hook up a gooseneck with it partly folded?
On an 8' bed, yes, at 2/3 open. On shorter beds, fold it all the way to the cab.
Is it waterproof?
It's very weather-resistant, with sealed edges, a tailgate seal and drain tubes. No tonneau is a sealed trunk, so keep electronics in a dry bag.
Does it fit a Ram 1500 with the multifunction tailgate?
Yes. Parts 448225 (6'4") and 448226 (5'7") are made for it, with their own install guide. Older answers online that say it won't fit came before these parts.
Does it fit the GMC Sierra CarbonPro bed?
Yes, part 448135 is built for it.
Is there one for the Silverado EV and Sierra EV?
Yes, part 448147 is made for the EV bed, with its own install guide.
Anything to know for a 2025-2026 Frontier or 2026 Tacoma?
Follow the truck-specific install guide step by step; the tailgate panel fit is snug on these trucks. Call us before you force anything and we'll walk you through it.