BAK

BAKFlip MX4 EZ-Lift

Hard folding MX4 with lift assist for one-hand opening

From $1,399.99

Find the part for your truck

Pick your truck to see the part that fits, its price and photos.

One more question about your truck and we'll have your part.

Call us and we'll find the right part for your truck.

  • Lift assist: 10.5 lb to open, versus about 30 lb for heavier covers
  • Extra-large paddle handle unlatches as you lift
  • Self-unlatching middle panels, so no cable pulls
  • Auto-latches closed; the paddle creates a tighter latch
  • 400 lb on top (evenly distributed)
  • Folds to the cab for full bed access; never blocks the third brake light
  • No-drill bolt-on install in about 30 minutes ยท 5-year warranty

5-year limited

About this product

The MX4 was already the hard fold to beat. The EZ-Lift fixes the one thing people grumbled about: lifting the panels.

A built-in lift assist takes the effort down to 10.5 lb, versus nearly 30 lb for heavier covers, so you can flip it open with one hand. Grab the extra-large paddle handle and the cover unlatches as you lift, with no separate release. The middle panels unlatch themselves too, so there are no more cable pulls.

Everything else is classic MX4. Multi-layer aluminum over a high-density core holds 400 lb on top. BAK's patented auto-latch locks the moment you close it, and the new paddle handle pulls the latch tighter, which BAK says makes this the most secure MX4 yet. Edge-to-edge seals and precision clamps keep the bed dry. Fold it to the cab and drive with the whole bed open, and your third brake light stays visible the whole time.

It bolts on with clamps and no drilling in about 30 minutes. Assembled in the USA with a 5-year warranty.

Features

  • 3x easier to lift

    3x easier to lift

    EZ-Lift does the heavy lifting. Folding it takes one hand and about a third of the effort: 10.5 lb of lift versus nearly 30 lb on heavier covers.

  • One-handed paddle access

    One-handed paddle access

    The extra-large paddle handle is easy to find and easy to grab, and the cover unlatches itself as you lift. One hand, one motion.

  • The most secure MX4 yet, with fewer steps

    The most secure MX4 yet, with fewer steps

    A first-of-its-kind paddle handle pulls the latch tighter, the patented auto-latch locks on close, and the middle panels unlatch themselves, so there are no cables to pull.

  • Sealed edge to edge

    Sealed edge to edge

    Advanced seals and precision-fit clamps run the whole perimeter, so rain, car washes and road spray stay outside and your cargo stays dry.

  • Multi-layer build that won't bend

    Multi-layer build that won't bend

    Premium multi-layer aluminum over a high-density core gives you a stiffer, tougher top, tested for years of daily use. Single-layer covers flex under pressure; this one is built not to.

  • Full bed, brake light still showing

    Full bed, brake light still showing

    Fold it to the cab, secure it and drive with the bed wide open. Big loads don't mean pulling the cover off, and BAK says it's the only hard fold that never blocks your third brake light.

Videos

How to install the BAKFlip MX4 EZ-Lift on a 2026 Ford F-150

Specifications

Brand
BAK
Series
BAKFlip MX4 EZ-Lift
Type
Hard folding
Material
Aluminum
Finish
Textured matte black
Profile
Low profile
Bed sizes
4.5 ft, 5 ft, 5.5 ft, 5.8 ft
Bed access
Full bed access
Rails
No rails
Load rating
400 lbs
Locks
Yes
No-drill install
Yes
Install time
About 30 minutes
Warranty
5-year limited

Install guides & documents

Warranty

  • Covers defects in materials and workmanship, from the original date of purchase.
  • BAK repairs or replaces the cover or part, its choice, and may substitute a newer model of similar form and function.
  • Original buyer only; not transferable. Keep the dated receipt or register the cover with RealTruck.
  • Not covered: accident damage, misuse, improper install, hail and other acts of nature, or towing the truck from the rear with the cover on.
  • To claim, get an RMA number from customer service before shipping anything back.

Good questions

How is this different from the regular MX4?
Same panels, seals, latches and 400 lb rating. The EZ-Lift adds lift assist, a paddle-handle unlatch and self-unlatching middle panels, so you never pull a cable.
How much easier is it to lift?
About 10.5 lb, roughly a third of the 30 lb you lift on a heavy hard cover. That's the difference between one hand and two.
Does it still lock itself?
Yes. It latches the moment it closes, and the paddle pulls it snug. With the tailgate locked, the bed is locked.
How do I keep it quiet over bumps?
After the first few drives, re-check that the clamps are tight and the latches are fully seated. That's all it takes.
I have a 3rd-gen Tacoma or a Ridgeline. Anything to know?
Use the truck-specific install guide for those trucks, and call us before you install. We'll make sure you have the right part and steps.
Can I drive with the bed open?
Yep. Fold it up to the cab, strap it and drive with the whole bed open. Your third brake light stays visible, except on 8' beds with the cover fully folded.
Can I put a rack on it?
Stake-pocket racks work. Racks that clamp to the bed rails don't, because the cover uses the rails. Want rails for a rack? Look at the MX4 TS.
Will it work with my bed liner?
Spray-in liners, yes. Drop-in liners too, as long as they don't wrap over the bed rails (you may trim a corner). Over-rail liners may need notching.
How long does it take to install?
About 30 minutes with basic hand tools. It clamps on with no drilling on most trucks; a few, like the Tacoma and Gladiator, need one 5/8" drain hole.
What's the warranty?
5 years from BAK. It's assembled in Missouri, USA.